Scientific Program

Schedule

The schedule of AMMM 2020 is continuously updated.

Wednesday, September 09, 2020

08:30 - 18:00 Registration
09:00 - 12:00 Tutorial
12:00 - 13:00 Poster Setup, Refreshments
13:00 - 14:00 Conference Opening
14:00 - 18:00 Scientific Program
18:00 - 21:00 Gala-Event

Tuesday, September 10, 2020

08:30 - 18:00 Registration
09:00 - 18:00 Scientific Program
19:00 - 22:00 Get-together

Friday, September 11, 2020

08:30 - 16:00 Registration
09:00 - 15:45 Scientific Program
15:45 - 16:00 Wrap-up and Farewell
16:00 - 17:00 Lab Tour


Scientific Program 2019

Registration
 - 
Opening Speeches
Thorsten M. Buzug, University of Lübeck
Hermann Seitz, University of Lübeck
 - 
Session 01: Diagnostics and therapy
Chair: Philip Oris, SLM Solutions, Lübeck
Design and optimization of patient-specific, 3D printed pediatric laryngoscopes
Jack B. Stubbs
Clinical Workflow in Medical Additive Manufacturing
Ina Ludwig, Anne Ernst, Phillip Gromzig, Jan Wolff
CT image segmentation for additive manufactured skull implants using deep learning
Jordi Minnema, Maureen van Eijnatten, Jan Wolff, Allard Adriaan Hendriksen, Kees Joost Batenburg, Tymour Forouzanfar
North American efforts to improve quality and build evidence for reimbursement for point-of-care 3D printing
Nicole Wake, Andrew Christensen, Jane Matsumoto, Peter Liacouras, Jay Morris, Adnan Sheikh, Kenneth Wang, William J. Weadock, Frank J. Rybicki
3D printed alternative to plaster of Paris in splinting applications, experimental overview
Angus Potter Fitzpatrick, Ian Gibson
Presurgical practice of supracondylar domosteotomie of cubitus varus deformity on 3D printed humerus
Thomas Friedrich, Maximilian Wattenberg, Ludger Tüshaus, Lutz Wünsch, Thorsten M. Buzug
 - 
Coffee
 - 
Session 02: Bioelectronics Application
Chair: Norbert Löwa, Physikalisch-Technische Bundesanstalt, Berlin (PTB)
Designing electrodes for electrical impedance spectroscopy in a four terminal setup
Tobias Barth, Viviane Silva Teixeira, Wolfgang Krautschneider
3D-printing technology as a tool for medical implantable electronic devices
Pablo Mendoza Ponce, Lait Abu Saleh, Wolfgang Krautschneider, Matthias Kuhl
Chamber miniaturization for four terminal electrical impedance spectroscopy
Tobias Barth, Viviane Silva Teixeira, Wolfgang Krautschneider
 - 
Session 03: Poster Teaser - 1 minute each
Chair: Hermann Seitz, University of Rostock
Modeling of a functional brace using the finite element method
Mohammed Alqahtani, Abdalla Omar, Glen Cooper, Paulo Bartolo
High-precision, patient-specific 3D models of brain aneurysms for therapy planning and training in interventional neuroradiology
Hannes Schwenke, Peter Schramm, André Kemmling
Evaluation of 3D-printing materials for the simulation of osteotomies
Thomas Friedrich, Helen Abi-Chokami, Maximilian Wattenberg, Thorsten M. Buzug
Optical recognition of error states to secure quality in FDM 3d Printing
Janik Klingert, Ralf Bruder, Achim Schweikard
Rapid prototyping of an elastic bladder model for in-vitro simulation of the transurethral resection of the prostate
Christian Damiani, Torben Dorbandt, Stephan Klein, Christoph Knopf
Towards a digital process chain for the automated manufacturing of pediatric orthoses: State of the art, challenges and new approaches
Quirin T. Schmid, Christina M. Hein, Kyra Kleine, Konstantin Struebig,Yannick S. Krieger, Tim C. Lueth
3D-printed standardized phantoms for small animal PET and MRI: a comparison study
Fenja Zell, Julia Mannheim, Melanie Grehn, Magdalena Rafecas
3D printing of active medical implants
Miguel Pereira Madureira, Stefan Gassman, Theodor Doll
Mechanical and dimensional characterization of multi-material additive manufactured parts
Markus Königshofer, Martin Stoiber, Ewald Unger, Christian Grasl, Francesco Moscato
Fabrication of a flexible stenosis phantom for flow measurements using additive manufacturing
Alina Ibbeken, Pragathi Gurumurthy, Fenja Zell, Christina Hagen, Thorsten M. Buzug
Dimensional accuracy of 3D printing of PEGDA parts using Digital Light Processing technology
Robert Mau, Jamal Nazir, Hermann Seitz
3D printed measurement phantoms for evaluation of magnetic particle imaging scanner
Silvio Dutz, Anton Stang, Lucas Wöckel, Diana Zahn, Cordula Grüttner, Norbert Löwa, Olaf Kosch, Frank Wiekhorst
Stereolithographic 3D printing (SLA 3DP) of pharmaceutical tablets: 3DP tablets
Eng Leong Tan, Paul Ho
Hot Melt Extrusion and 3D-Printing of different PVA-Qualities
Julius Krause, Linus Großmann, Werner Weitschies
Utilization of cryogenic temperatures to reduce line width variability in 3D bioprinted hydrogel lattices
Linnea Warburton, Catherine Liu, Kunal Dharmadhikari, Pavan Vemulakonda, Yahya Cheema, Neal Kewelramani, Danielle Sidelnikov, Kevin Aroom, Lester Schultheis
PMMA and PVP based polymers for stereolitho-graphic manufacture of tailored drug release
Katharina Wulf, Celine Riess, Natalia Dominika Rekowska, Thomas Eickner, Hermann Seitz, Niels Grabow, Michael Teske
Integration of subtractive 3D printing into micromolding of biodegradable implants for spinal cord treatment
Jana Marina von Poblotzki, Hoc Khiem Trieu
Quality assurance of printed materials using x-ray diffraction
Kevin Aroom, Peter Y Zavalij, Huapeng Huang, Lex Schultheis
Investigation of cell dynamics in 3D cell spheroids and cell interaction with 3D printed scaffolds by mOCT
Tabea Kohlfaerber, Shujun Ding, Ramtin Rahmanzadeh, Thomas Jüngst, Jürgen Groll, Hinnerk Schulz-Hildebrandt, Gereon Hüttmann
Feasibility of 3D printing for customized radiotherapeutic models to be used in superficial skin cancer therapy
Ali Pashazadeh, Nathan Castro, Elena Morganti, Marie-Luise Wille, Axel Boese, Dietmar Hutmacher, Michael Friebe
Surface anatomy leading to personalized surface applicator: 3D printing for brachytherapy of skin tumors
Ali Pashazadeh, Axel Boese, Michael Friebe
Implementation of a test rig to characterize the process suitability of filaments for 3D printing
Volker Weißmann, Jan Eric Schimmöller, Harald Hansmann, Nico Laufer, Stefan Ofe
Differential Fast Scanning Calorimetry as analytical tool for mimicking melting and solidification in additive manufacturing
Bin Yang, Sinah Malz, Evgeny Zhuravlev, Benjamin Milkereit, Christoph Schick, Olaf Kessler
Innovative revolving biopsy device design supported by additive manufacturing
Marwah Maatoq Al-Maatoq, Asmita doshi, Marco Kalmar, Axel Boese, Michael Friebe
The challenge of repeatable manufacturing and the influence on the anchoring strength at the example of press-fit acetabular cups
Volker Weißmann, Harald Hansmann, Rainer Bader, Christian Boss, Anton du Plessis
Mechanical and rheological characterization of hydrogels and hydrogel precursors for cartilage tissue engineering and biofabrication
Alina Weizel, Thomas Distler, Christian Polley, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz
Development of patient-specific, long-lasting bioabsorbable sinus implants in patients with chronic frontal sinusitis
Constantin Weber, Thomas Lenarz, Verena Scheper, Samuel John, Ziwen Gao
Assessing the performance of upper limb prostheses with virtual evaluation
Chung Han Chua, Ruth Goodridge, Steve Benford, Ian Ashcroft
From a static to a dynamic 3D anatomical phantom of a rat
Patryk Szwargulski, Miriam Exner, Peter Ludewig, Tobias Knopp, Matthias Graeser
3D printed capsules for colon targeted drug delivery
Regine Beeck, Dariah-Sohreh Seradj, Werner Weitschies
Additive manufacturing of magnetic polymer phantoms for magnetic particle imaging
Norbert Löwa, Benjamin Godau, Dirk Gutkelch, Hendrik Paysen, Axel Kuhn, Michael Herzog, Frank Wiekhorst
Long-term imaging of cell growth and cell death in three-dimensional cell cultures
Nina Hedemann, Andreas Herz, Reinhild Geisen, Nils Tribian, Alexander Thomas, Lutz Kloke, Ben Werdelmann, Marion van Mackelenbergh, Nicolai Maass, Dirk Bauerschlag
FDM 3D printing of immediate release tablets loaded with an acid- and thermo-labile drug
Vanessa Domsta, Wiebke Kempin, Georg Grathoff, Iris Brecht, Beatrice Semmling, Susan Tillmann, Werner Weitschies, Anne Seidlitz
Design and evaluation of 3D printed objects regarding form stability
Jan Stelzner, Victoria Gerant, Sara Schonebeck, Mareike Stender, Thorsten M. Buzug
 - 
Group Photo
 - 
Lunch
 - 
Session 04: Medical Aids and Devices
Chair: Jack Stubbs, University of Central Florida, Orlando
Artificial eye simulator for gonioscopy
Ewald Unger, Gunpreet Oberoi, Winfried Mayr, Francesco Moscato, Clemens Vass
3D-printing of the aortic root for in vitro hydrodynamic assessment of transcatheter aortic valve prostheses
Sebastian Kaule, Stefan Siewert, Ariane Dierke, Jonas Keiler, Andreas Wree, Niels Grabow, Nicolas Degen, Alper Öner, Klaus-Peter Schmitz, Michael Stiehm
Concept of an in-vitro model for endovascular stroke treatment using additive manufacturing
Nadine Wortmann, Johanna Spallek, Anna Kyselyova, Andreas Maximilian Frölich, Jens Fiehler, Dieter Krause
Tiny dental devices printed with PEEK
Yiqiao Wang, Adam Rumjahn, Wolf-Dieter Müller, Andreas Schwitalla
Additive manufacturing for personalised mitral annuloplasty devices
Charlotte Blake, Donal McNally, Chirattikan Srisook, Jonathon Mitchell-Smith, Rudolf Billeter-Clark, James Dixon, Adam Clare, Ruth Goodridge
Automated design of a custom-made hand rehabilitation robot
Christina M. Hein, Yannick S. Krieger, Christian Dietz, Quirin T. Schmid, Tim C. Lueth
Polyamide based wrist orthosis generated by selective laser sintering
Robert Raschke, Mark Vehse
 - 
Session 05: Coffee and Posters (P01-P17)
Modeling of a functional brace using the finite element method
Mohammed Alqahtani, Abdalla Omar, Glen Cooper, Paulo Bartolo
High-precision, patient-specific 3D models of brain aneurysms for therapy planning and training in interventional neuroradiology
Hannes Schwenke, Peter Schramm, André Kemmling
Evaluation of 3D-printing materials for the simulation of osteotomies
Thomas Friedrich, Helen Abi-Chokami, Maximilian Wattenberg, Thorsten M. Buzug
Optical recognition of error states to secure quality in FDM 3d Printing
Janik Klingert, Ralf Bruder, Achim Schweikard
Rapid prototyping of an elastic bladder model for in-vitro simulation of the transurethral resection of the prostate
Christian Damiani, Torben Dorbandt, Stephan Klein, Christoph Knopf
Towards a digital process chain for the automated manufacturing of pediatric orthoses: State of the art, challenges and new approaches
Quirin T. Schmid, Christina M. Hein, Kyra Kleine, Konstantin Struebig,Yannick S. Krieger, Tim C. Lueth
3D-printed standardized phantoms for small animal PET and MRI: a comparison study
Fenja Zell, Julia Mannheim, Melanie Grehn, Magdalena Rafecas
3D printing of active medical implants
Miguel Pereira Madureira, Stefan Gassman, Theodor Doll
Mechanical and dimensional characterization of multi-material additive manufactured parts
Markus Königshofer, Martin Stoiber, Ewald Unger, Christian Grasl, Francesco Moscato
Fabrication of a flexible stenosis phantom for flow measurements using additive manufacturing
Alina Ibbeken, Pragathi Gurumurthy, Fenja Zell, Christina Hagen, Thorsten M. Buzug
Dimensional accuracy of 3D printing of PEGDA parts using Digital Light Processing technology
Robert Mau, Jamal Nazir, Hermann Seitz
3D printed measurement phantoms for evaluation of magnetic particle imaging scanner
Silvio Dutz, Anton Stang, Lucas Wöckel, Diana Zahn, Cordula Grüttner, Norbert Löwa, Olaf Kosch, Frank Wiekhorst
Stereolithographic 3D printing (SLA 3DP) of pharmaceutical tablets: 3DP tablets
Eng Leong Tan, Paul Ho
Hot Melt Extrusion and 3D-Printing of different PVA-Qualities
Julius Krause, Linus Großmann, Werner Weitschies
Utilization of cryogenic temperatures to reduce line width variability in 3D bioprinted hydrogel lattices
Linnea Warburton, Catherine Liu, Kunal Dharmadhikari, Pavan Vemulakonda, Yahya Cheema, Neal Kewelramani, Danielle Sidelnikov, Kevin Aroom, Lester Schultheis
PMMA and PVP based polymers for stereolitho-graphic manufacture of tailored drug release
Katharina Wulf, Celine Riess, Natalia Dominika Rekowska, Thomas Eickner, Hermann Seitz, Niels Grabow, Michael Teske
Integration of subtractive 3D printing into micromolding of biodegradable implants for spinal cord treatment
Jana Marina von Poblotzki, Hoc Khiem Trieu
 - 
Session 06: Industrial Developments and Regulatory Affairs
Chair: Heike Wachenhausen, Wachenhausen Rechtsanwälte, Lübeck
3D printing and medical devices: a challenge for legislation?
Heike Wachenhausen
Selective laser melting for the production of surgical implants
Philip Oris
3D image-based methods for investigating additive manufactured spinal implants
Kerim Genc, Denis Feindt, Ali Kiapour, Herminso Gomez, Patrick Tompsett, David Milner, Yunjie Wang, Philippe Young
Hybrid additive-subtractive fs laser 3D fabrication of medical devices
Linas Jonusauskas, Tomas Baravykas, Titas Tickunas, Agne Butkute, Tomas Gadisauskas, Dovile Andrijec
Medical AM of High Performance Plastics at the Point-of-Care
Stefan Leonhardt, Franz Bauer
Elaboration of polyvalent material from polymer compound for tissue engineering by stereolithography
Thomas Brossier, Gaël Volpi, Sébastien Blanquer, Vincent Lapinte
Medical 3D printing at point of care: Spotlights on software, hardware and processes
Martin Herzmann, Christoph Trautner
Get-Together
 - 
Registration
 - 
Session 07: Scaffolds, Implants and Drug delivery systems I
Chair: Linas Jonusauskas, Femtika, Vilnius
Polymer-ceramic bone bricks for tissue engineering
Evangelos Daskalakis, Benedict Smith, Enes Aslan, Fengyuan Liu, Glen Cooper, Andrew Weightman, Bahattin Koc, Gordon Blunn, Paulo Bartolo
PEOT-PBT and poly(ester urethane) microwell scaffolds for extrahepatic islet transplantation
Elahe Hadavi, Ian Gibson
3D printing of smart materials for bone regeneration
Christian Polley, Thomas Distler, David Rüffer, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz
Development of an electrospinning jet control technique for manufacturing vascular grafts
Christian Grasl, Michael Desch, Martin Helmut Stoiber, Francesco Moscato, Heinrich Schima
 - 
Session 08: Keynote
Chair: Thorsten M. Buzug, University of Lübeck
Intellectual Property: Assessment of Additive Manufacturing as new Legal Category
Marc Wachenhausen

CV: Marc Wachenhausen holds a degree in engineering and is a German and European patent attorney. He has been working in the field of intellectual property law since 2000 and has been running a patent law office in Munich since 2016, specialisi

 - 
Coffee
 - 
Session 09: Scaffolds, Implants and Drug Delivery Systems II
Chair: Ewald Unger, Medical University of Vienna
AM of degradable Mg-implants by sintering
Thomas Ebel, Martin Wolff, Hendrik Buresch, Wolfgang Limberg, Christian Born, Regine Willumeit-Römer
3D printing of hydrogel scaffolds based on poly(ethylene glycol) diacrylate
Sven Frank Klimaschewski, Mark Vehse
3D-printed PEGDA structure with multiple depots for advanced drug delivery systems
Jan Konasch, Alexander Riess, Robert Mau, Michael Teske, Natalia Rekowska, Thomas Eickner, Niels Grabow, Hermann Seitz
Development of patient-specific drug-releasing round window implants for the treatment of inner ear diseases
Farnaz Matin, Ziwen Gao, Verena Scheper, Samuel John, Thomas Lenarz
Robust cost modelling for ink-jetted pharmaceuticals
Jin Ding, Martin Baumers, Ricky Wildman
Additive manufacturing of superparamagnetic micro-devices for magnetic actuation
Anna C. Bakenecker, Ievgeniia Topolniak, Kerstin Lüdtke-Buzug, Brian R. Pauw, Thorsten M. Buzug
 - 
Lunch
 - 
Session 10: Material Properties and Structural Design
Chair: Francesco Moscato, Medical University of Vienna
Fatigue behavior and morphology in Selective Laser Melted Ti-6Al-4V cellular materials
Michele Dallago, Valerio Luchin, Gianluca Zappini, Sunil Raghavendra, Damiano Pasini, Matteo Benedetti
Hybrid solid-porous titanium scaffolds: Fabrication and post processing after selective laser melting
Bartlomiej Adam Wysocki, Agnieszka Chmielewska, Łukasz Żrodowski, Wojciech Święszkowski
Measuring porosity of 3d printed structures using pycnometry
Kevin Aroom, Linnea Warburton, William Bentley, Lester Schultheis
3D printing in PEEK-based medical devices
Mojtaba Tafaoli-Masoule, Mohsen Shakeri, S. Abolfazl Zahedi, Mohammad Vaezi, Hermann Seitz
Laser metal fusion of beta Ti 21S alloy
Alireza Jam, Massimo Pellizzari, Matteo Benedetti
 - 
Session 11: Coffee and Posters (P18-P34)
Quality assurance of printed materials using x-ray diffraction
Kevin Aroom, Peter Y Zavalij, Huapeng Huang, Lex Schultheis
Investigation of cell dynamics in 3D cell spheroids and cell interaction with 3D printed scaffolds by mOCT
Tabea Kohlfaerber, Shujun Ding, Ramtin Rahmanzadeh, Thomas Jüngst, Jürgen Groll, Hinnerk Schulz-Hildebrandt, Gereon Hüttmann
Feasibility of 3D printing for customized radiotherapeutic models to be used in superficial skin cancer therapy
Ali Pashazadeh, Nathan Castro, Elena Morganti, Marie-Luise Wille, Axel Boese, Dietmar Hutmacher, Michael Friebe
Surface anatomy leading to personalized surface applicator: 3D printing for brachytherapy of skin tumors
Ali Pashazadeh, Axel Boese, Michael Friebe
Implementation of a test rig to characterize the process suitability of filaments for 3D printing
Volker Weißmann, Jan Eric Schimmöller, Harald Hansmann, Nico Laufer, Stefan Ofe
Differential Fast Scanning Calorimetry as analytical tool for mimicking melting and solidification in additive manufacturing
Bin Yang, Sinah Malz, Evgeny Zhuravlev, Benjamin Milkereit, Christoph Schick, Olaf Kessler
Innovative revolving biopsy device design supported by additive manufacturing
Marwah Maatoq Al-Maatoq, Asmita doshi, Marco Kalmar, Axel Boese, Michael Friebe
The challenge of repeatable manufacturing and the influence on the anchoring strength at the example of press-fit acetabular cups
Volker Weißmann, Harald Hansmann, Rainer Bader, Christian Boss, Anton du Plessis
Mechanical and rheological characterization of hydrogels and hydrogel precursors for cartilage tissue engineering and biofabrication
Alina Weizel, Thomas Distler, Christian Polley, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz
Development of patient-specific, long-lasting bioabsorbable sinus implants in patients with chronic frontal sinusitis
Constantin Weber, Thomas Lenarz, Verena Scheper, Samuel John, Ziwen Gao
Assessing the performance of upper limb prostheses with virtual evaluation
Chung Han Chua, Ruth Goodridge, Steve Benford, Ian Ashcroft
From a static to a dynamic 3D anatomical phantom of a rat
Patryk Szwargulski, Miriam Exner, Peter Ludewig, Tobias Knopp, Matthias Graeser
3D printed capsules for colon targeted drug delivery
Regine Beeck, Dariah-Sohreh Seradj, Werner Weitschies
Additive manufacturing of magnetic polymer phantoms for magnetic particle imaging
Norbert Löwa, Benjamin Godau, Dirk Gutkelch, Hendrik Paysen, Axel Kuhn, Michael Herzog, Frank Wiekhorst
Long-term imaging of cell growth and cell death in three-dimensional cell cultures
Nina Hedemann, Andreas Herz, Reinhild Geisen, Nils Tribian, Alexander Thomas, Lutz Kloke, Ben Werdelmann, Marion van Mackelenbergh, Nicolai Maass, Dirk Bauerschlag
FDM 3D printing of immediate release tablets loaded with an acid- and thermo-labile drug
Vanessa Domsta, Wiebke Kempin, Georg Grathoff, Iris Brecht, Beatrice Semmling, Susan Tillmann, Werner Weitschies, Anne Seidlitz
Design and evaluation of 3D printed objects regarding form stability
Jan Stelzner, Victoria Gerant, Sara Schonebeck, Mareike Stender, Thorsten M. Buzug
 - 
Session 12: Phantoms
Chair: Ludger Tüshaus, University Medical Center (UKSH) Lübeck
A 3D printed patient-specific dual compartment breast phantom for validating MRI acquisition and analysis techniques
Nicole Wake, Carlotta Ianniello, Ryan Brown, Jerzy Walczyk, Linda Moy, Christopher Collins, Henry Rusinek
Additive manufacturing: A growing platform to replace, reduce and refine animal experiments
Gunpreet Oberoi
An Endovascular Simulator based on Exchangeable 3D-printed Real Vascular Pathologies as Alternative to the use of Animals
Mark Kaschwich, Florian Matysiak, Juljan Bouchagiar, Annika Dell, Andreas Bayer, Marco Horn, Markus Kleemann
Phantom development for a magnetic particle imaging head scanner
Matthias Graeser, Patryk Szwargulski, Nadine Gdaniec, Franziska Werner, Florian Thieben, Tobias Knopp
Construction of a highly flexible head and neck phantom
Melanie Grehn, Christian Ziemann, Maik Stille, Florian Cremers, Dirk Rades, Thorsten M. Buzug
Wrap-up and Farewell
Modeling of a functional brace using the finite element method
Mohammed Alqahtani, Abdalla Omar, Glen Cooper, Paulo Bartolo
High-precision, patient-specific 3D models of brain aneurysms for therapy planning and training in interventional neuroradiology
Hannes Schwenke, Peter Schramm, André Kemmling
Evaluation of 3D-printing materials for the simulation of osteotomies
Thomas Friedrich, Helen Abi-Chokami, Maximilian Wattenberg, Thorsten M. Buzug
Optical recognition of error states to secure quality in FDM 3d Printing
Janik Klingert, Ralf Bruder, Achim Schweikard
Rapid prototyping of an elastic bladder model for in-vitro simulation of the transurethral resection of the prostate
Christian Damiani, Torben Dorbandt, Stephan Klein, Christoph Knopf
Towards a digital process chain for the automated manufacturing of pediatric orthoses: State of the art, challenges and new approaches
Quirin T. Schmid, Christina M. Hein, Kyra Kleine, Konstantin Struebig,Yannick S. Krieger, Tim C. Lueth
3D-printed standardized phantoms for small animal PET and MRI: a comparison study
Fenja Zell, Julia Mannheim, Melanie Grehn, Magdalena Rafecas
3D printing of active medical implants
Miguel Pereira Madureira, Stefan Gassman, Theodor Doll
Mechanical and dimensional characterization of multi-material additive manufactured parts
Markus Königshofer, Martin Stoiber, Ewald Unger, Christian Grasl, Francesco Moscato
Fabrication of a flexible stenosis phantom for flow measurements using additive manufacturing
Alina Ibbeken, Pragathi Gurumurthy, Fenja Zell, Christina Hagen, Thorsten M. Buzug
Dimensional accuracy of 3D printing of PEGDA parts using Digital Light Processing technology
Robert Mau, Jamal Nazir, Hermann Seitz
3D printed measurement phantoms for evaluation of magnetic particle imaging scanner
Silvio Dutz, Anton Stang, Lucas Wöckel, Diana Zahn, Cordula Grüttner, Norbert Löwa, Olaf Kosch, Frank Wiekhorst
Stereolithographic 3D printing (SLA 3DP) of pharmaceutical tablets: 3DP tablets
Eng Leong Tan, Paul Ho
Hot Melt Extrusion and 3D-Printing of different PVA-Qualities
Julius Krause, Linus Großmann, Werner Weitschies
Utilization of cryogenic temperatures to reduce line width variability in 3D bioprinted hydrogel lattices
Linnea Warburton, Catherine Liu, Kunal Dharmadhikari, Pavan Vemulakonda, Yahya Cheema, Neal Kewelramani, Danielle Sidelnikov, Kevin Aroom, Lester Schultheis
PMMA and PVP based polymers for stereolitho-graphic manufacture of tailored drug release
Katharina Wulf, Celine Riess, Natalia Dominika Rekowska, Thomas Eickner, Hermann Seitz, Niels Grabow, Michael Teske
Integration of subtractive 3D printing into micromolding of biodegradable implants for spinal cord treatment
Jana Marina von Poblotzki, Hoc Khiem Trieu
Quality assurance of printed materials using x-ray diffraction
Kevin Aroom, Peter Y Zavalij, Huapeng Huang, Lex Schultheis
Investigation of cell dynamics in 3D cell spheroids and cell interaction with 3D printed scaffolds by mOCT
Tabea Kohlfaerber, Shujun Ding, Ramtin Rahmanzadeh, Thomas Jüngst, Jürgen Groll, Hinnerk Schulz-Hildebrandt, Gereon Hüttmann
Feasibility of 3D printing for customized radiotherapeutic models to be used in superficial skin cancer therapy
Ali Pashazadeh, Nathan Castro, Elena Morganti, Marie-Luise Wille, Axel Boese, Dietmar Hutmacher, Michael Friebe
Surface anatomy leading to personalized surface applicator: 3D printing for brachytherapy of skin tumors
Ali Pashazadeh, Axel Boese, Michael Friebe
Implementation of a test rig to characterize the process suitability of filaments for 3D printing
Volker Weißmann, Jan Eric Schimmöller, Harald Hansmann, Nico Laufer, Stefan Ofe
Differential Fast Scanning Calorimetry as analytical tool for mimicking melting and solidification in additive manufacturing
Bin Yang, Sinah Malz, Evgeny Zhuravlev, Benjamin Milkereit, Christoph Schick, Olaf Kessler
Innovative revolving biopsy device design supported by additive manufacturing
Marwah Maatoq Al-Maatoq, Asmita doshi, Marco Kalmar, Axel Boese, Michael Friebe
The challenge of repeatable manufacturing and the influence on the anchoring strength at the example of press-fit acetabular cups
Volker Weißmann, Harald Hansmann, Rainer Bader, Christian Boss, Anton du Plessis
Mechanical and rheological characterization of hydrogels and hydrogel precursors for cartilage tissue engineering and biofabrication
Alina Weizel, Thomas Distler, Christian Polley, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz
Development of patient-specific, long-lasting bioabsorbable sinus implants in patients with chronic frontal sinusitis
Constantin Weber, Thomas Lenarz, Verena Scheper, Samuel John, Ziwen Gao
Assessing the performance of upper limb prostheses with virtual evaluation
Chung Han Chua, Ruth Goodridge, Steve Benford, Ian Ashcroft
From a static to a dynamic 3D anatomical phantom of a rat
Patryk Szwargulski, Miriam Exner, Peter Ludewig, Tobias Knopp, Matthias Graeser
3D printed capsules for colon targeted drug delivery
Regine Beeck, Dariah-Sohreh Seradj, Werner Weitschies
Additive manufacturing of magnetic polymer phantoms for magnetic particle imaging
Norbert Löwa, Benjamin Godau, Dirk Gutkelch, Hendrik Paysen, Axel Kuhn, Michael Herzog, Frank Wiekhorst
Long-term imaging of cell growth and cell death in three-dimensional cell cultures
Nina Hedemann, Andreas Herz, Reinhild Geisen, Nils Tribian, Alexander Thomas, Lutz Kloke, Ben Werdelmann, Marion van Mackelenbergh, Nicolai Maass, Dirk Bauerschlag
FDM 3D printing of immediate release tablets loaded with an acid- and thermo-labile drug
Vanessa Domsta, Wiebke Kempin, Georg Grathoff, Iris Brecht, Beatrice Semmling, Susan Tillmann, Werner Weitschies, Anne Seidlitz
Design and evaluation of 3D printed objects regarding form stability
Jan Stelzner, Victoria Gerant, Sara Schonebeck, Mareike Stender, Thorsten M. Buzug