Previous Conferences AMMM

Scientific Program 2019 with all accepted contributions

From
08:00

From 08:00
Registration

08:45 - 09:00

08:45 - 09:00
Opening Speeches
Thorsten M. Buzug, University of Lübeck Hermann Seitz, University of Lübeck

09:00 - 10:30

09:00 - 10:30
Session 01: Diagnostics and therapy
Chair: Philip Oris, SLM Solutions, Lübeck

S01T01

Design and optimization of patient-specific, 3D printed pediatric laryngoscopes

Jack B. Stubbs

S01T02

Clinical Workflow in Medical Additive Manufacturing

Ina Ludwig, Anne Ernst, Phillip Gromzig, Jan Wolff

S01T03

CT image segmentation for additive manufactured skull implants using deep learning

Jordi Minnema, Maureen van Eijnatten, Jan Wolff, Allard Adriaan Hendriksen, Kees Joost Batenburg, Tymour Forouzanfar

S01T04

North American efforts to improve quality and build evidence for reimbursement for point-of-care 3D printing

Nicole Wake, Andrew Christensen, Jane Matsumoto, Peter Liacouras, Jay Morris, Adnan Sheikh, Kenneth Wang, William J. Weadock, Frank J. Rybicki

S01T05

3D printed alternative to plaster of Paris in splinting applications, experimental overview

Angus Potter Fitzpatrick, Ian Gibson

S01T06

Presurgical practice of supracondylar domosteotomie of cubitus varus deformity on 3D printed humerus

Thomas Friedrich, Maximilian Wattenberg, Ludger Tüshaus, Lutz Wünsch, Thorsten M. Buzug

10:30 - 11:00

10:30 - 11:00
Coffee

11:00 - 11:45

11:00 - 11:45
Session 02: Bioelectronics Application
Chair: Norbert Löwa, Physikalisch-Technische Bundesanstalt, Berlin (PTB)

S02T01

Designing electrodes for electrical impedance spectroscopy in a four terminal setup

Tobias Barth, Viviane Silva Teixeira, Wolfgang Krautschneider

S02T03

3D-printing technology as a tool for medical implantable electronic devices

Pablo Mendoza Ponce, Lait Abu Saleh, Wolfgang Krautschneider, Matthias Kuhl

S02T04

Chamber miniaturization for four terminal electrical impedance spectroscopy

Tobias Barth, Viviane Silva Teixeira, Wolfgang Krautschneider

11:45 - 12:45

11:45 - 12:45
Session 03: Poster Teaser - 1 minute each
Chair: Hermann Seitz, University of Rostock

S03P01

Modeling of a functional brace using the finite element method

Mohammed Alqahtani, Abdalla Omar, Glen Cooper, Paulo Bartolo

S03P02

High-precision, patient-specific 3D models of brain aneurysms for therapy planning and training in interventional neuroradiology

Hannes Schwenke, Peter Schramm, André Kemmling

S03P03

Evaluation of 3D-printing materials for the simulation of osteotomies

Thomas Friedrich, Helen Abi-Chokami, Maximilian Wattenberg, Thorsten M. Buzug

S03P04

Optical recognition of error states to secure quality in FDM 3d Printing

Janik Klingert, Ralf Bruder, Achim Schweikard

S03P05

Rapid prototyping of an elastic bladder model for in-vitro simulation of the transurethral resection of the prostate

Christian Damiani, Torben Dorbandt, Stephan Klein, Christoph Knopf

S03P06

Towards a digital process chain for the automated manufacturing of pediatric orthoses: State of the art, challenges and new approaches

Quirin T. Schmid, Christina M. Hein, Kyra Kleine, Konstantin Struebig,Yannick S. Krieger, Tim C. Lueth

S03P07

3D-printed standardized phantoms for small animal PET and MRI: a comparison study

Fenja Zell, Julia Mannheim, Melanie Grehn, Magdalena Rafecas

S03P08

3D printing of active medical implants

Miguel Pereira Madureira, Stefan Gassman, Theodor Doll

S03P09

Mechanical and dimensional characterization of multi-material additive manufactured parts

Markus Königshofer, Martin Stoiber, Ewald Unger, Christian Grasl, Francesco Moscato

S03P10

Fabrication of a flexible stenosis phantom for flow measurements using additive manufacturing

Alina Ibbeken, Pragathi Gurumurthy, Fenja Zell, Christina Hagen, Thorsten M. Buzug

S03P11

Dimensional accuracy of 3D printing of PEGDA parts using Digital Light Processing technology

Robert Mau, Jamal Nazir, Hermann Seitz

S03P12

3D printed measurement phantoms for evaluation of magnetic particle imaging scanner

Silvio Dutz, Anton Stang, Lucas Wöckel, Diana Zahn, Cordula Grüttner, Norbert Löwa, Olaf Kosch, Frank Wiekhorst

S03P13

Stereolithographic 3D printing (SLA 3DP) of pharmaceutical tablets: 3DP tablets

Eng Leong Tan, Paul Ho

S03P14

Hot Melt Extrusion and 3D-Printing of different PVA-Qualities

Julius Krause, Linus Großmann, Werner Weitschies

S03P15

Utilization of cryogenic temperatures to reduce line width variability in 3D bioprinted hydrogel lattices

Linnea Warburton, Catherine Liu, Kunal Dharmadhikari, Pavan Vemulakonda, Yahya Cheema, Neal Kewelramani, Danielle Sidelnikov, Kevin Aroom, Lester Schultheis

S03P16

PMMA and PVP based polymers for stereolitho-graphic manufacture of tailored drug release

Katharina Wulf, Celine Riess, Natalia Dominika Rekowska, Thomas Eickner, Hermann Seitz, Niels Grabow, Michael Teske

S03P17

Integration of subtractive 3D printing into micromolding of biodegradable implants for spinal cord treatment

Jana Marina von Poblotzki, Hoc Khiem Trieu

S03P18

Quality assurance of printed materials using x-ray diffraction

Kevin Aroom, Peter Y Zavalij, Huapeng Huang, Lex Schultheis

S03P19

Investigation of cell dynamics in 3D cell spheroids and cell interaction with 3D printed scaffolds by mOCT

Tabea Kohlfaerber, Shujun Ding, Ramtin Rahmanzadeh, Thomas Jüngst, Jürgen Groll, Hinnerk Schulz-Hildebrandt, Gereon Hüttmann

S03P20

Feasibility of 3D printing for customized radiotherapeutic models to be used in superficial skin cancer therapy

Ali Pashazadeh, Nathan Castro, Elena Morganti, Marie-Luise Wille, Axel Boese, Dietmar Hutmacher, Michael Friebe

S03P21

Surface anatomy leading to personalized surface applicator: 3D printing for brachytherapy of skin tumors

Ali Pashazadeh, Axel Boese, Michael Friebe

S03P22

Implementation of a test rig to characterize the process suitability of filaments for 3D printing

Volker Weißmann, Jan Eric Schimmöller, Harald Hansmann, Nico Laufer, Stefan Ofe

S03P23

Differential Fast Scanning Calorimetry as analytical tool for mimicking melting and solidification in additive manufacturing

Bin Yang, Sinah Malz, Evgeny Zhuravlev, Benjamin Milkereit, Christoph Schick, Olaf Kessler

S03P24

Innovative revolving biopsy device design supported by additive manufacturing

Marwah Maatoq Al-Maatoq, Asmita doshi, Marco Kalmar, Axel Boese, Michael Friebe

S03P25

The challenge of repeatable manufacturing and the influence on the anchoring strength at the example of press-fit acetabular cups

Volker Weißmann, Harald Hansmann, Rainer Bader, Christian Boss, Anton du Plessis

S03P26

Mechanical and rheological characterization of hydrogels and hydrogel precursors for cartilage tissue engineering and biofabrication

Alina Weizel, Thomas Distler, Christian Polley, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz

S03P27

Development of patient-specific, long-lasting bioabsorbable sinus implants in patients with chronic frontal sinusitis

Constantin Weber, Thomas Lenarz, Verena Scheper, Samuel John, Ziwen Gao

S03P28

Assessing the performance of upper limb prostheses with virtual evaluation

Chung Han Chua, Ruth Goodridge, Steve Benford, Ian Ashcroft

S03P29

From a static to a dynamic 3D anatomical phantom of a rat

Patryk Szwargulski, Miriam Exner, Peter Ludewig, Tobias Knopp, Matthias Graeser

S03P30

3D printed capsules for colon targeted drug delivery

Regine Beeck, Dariah-Sohreh Seradj, Werner Weitschies

S03P31

Additive manufacturing of magnetic polymer phantoms for magnetic particle imaging

Norbert Löwa, Benjamin Godau, Dirk Gutkelch, Hendrik Paysen, Axel Kuhn, Michael Herzog, Frank Wiekhorst

S03P32

Long-term imaging of cell growth and cell death in three-dimensional cell cultures

Nina Hedemann, Andreas Herz, Reinhild Geisen, Nils Tribian, Alexander Thomas, Lutz Kloke, Ben Werdelmann, Marion van Mackelenbergh, Nicolai Maass, Dirk Bauerschlag

S03P33

FDM 3D printing of immediate release tablets loaded with an acid- and thermo-labile drug

Vanessa Domsta, Wiebke Kempin, Georg Grathoff, Iris Brecht, Beatrice Semmling, Susan Tillmann, Werner Weitschies, Anne Seidlitz

S03P34

Design and evaluation of 3D printed objects regarding form stability

Jan Stelzner, Victoria Gerant, Sara Schonebeck, Mareike Stender, Thorsten M. Buzug

12:45 - 13:00

12:45 - 13:00
Group Photo

13:00 - 14:00

13:00 - 14:00
Lunch

14:00 - 15:45

14:00 - 15:45
Session 04: Medical Aids and Devices
Chair: Jack Stubbs, University of Central Florida, Orlando

S04T01

Artificial eye simulator for gonioscopy

Ewald Unger, Gunpreet Oberoi, Winfried Mayr, Francesco Moscato, Clemens Vass

S04T02

3D-printing of the aortic root for in vitro hydrodynamic assessment of transcatheter aortic valve prostheses

Sebastian Kaule, Stefan Siewert, Ariane Dierke, Jonas Keiler, Andreas Wree, Niels Grabow, Nicolas Degen, Alper Öner, Klaus-Peter Schmitz, Michael Stiehm

S04T03

Concept of an in-vitro model for endovascular stroke treatment using additive manufacturing

Nadine Wortmann, Johanna Spallek, Anna Kyselyova, Andreas Maximilian Frölich, Jens Fiehler, Dieter Krause

S04T04

Tiny dental devices printed with PEEK

Yiqiao Wang, Adam Rumjahn, Wolf-Dieter Müller, Andreas Schwitalla

S04T05

Additive manufacturing for personalised mitral annuloplasty devices

Charlotte Blake, Donal McNally, Chirattikan Srisook, Jonathon Mitchell-Smith, Rudolf Billeter-Clark, James Dixon, Adam Clare, Ruth Goodridge

S04T06

Automated design of a custom-made hand rehabilitation robot

Christina M. Hein, Yannick S. Krieger, Christian Dietz, Quirin T. Schmid, Tim C. Lueth

S04T07

Polyamide based wrist orthosis generated by selective laser sintering

Robert Raschke, Mark Vehse

15:45 - 16:45

15:45 - 16:45
Session 05: Coffee and Posters (P01-P17)

P01

Modeling of a functional brace using the finite element method

Mohammed Alqahtani, Abdalla Omar, Glen Cooper, Paulo Bartolo

P02

High-precision, patient-specific 3D models of brain aneurysms for therapy planning and training in interventional neuroradiology

Hannes Schwenke, Peter Schramm, André Kemmling

P03

Evaluation of 3D-printing materials for the simulation of osteotomies

Thomas Friedrich, Helen Abi-Chokami, Maximilian Wattenberg, Thorsten M. Buzug

P04

Optical recognition of error states to secure quality in FDM 3d Printing

Janik Klingert, Ralf Bruder, Achim Schweikard

P05

Rapid prototyping of an elastic bladder model for in-vitro simulation of the transurethral resection of the prostate

Christian Damiani, Torben Dorbandt, Stephan Klein, Christoph Knopf

P06

Towards a digital process chain for the automated manufacturing of pediatric orthoses: State of the art, challenges and new approaches

Quirin T. Schmid, Christina M. Hein, Kyra Kleine, Konstantin Struebig,Yannick S. Krieger, Tim C. Lueth

P07

3D-printed standardized phantoms for small animal PET and MRI: a comparison study

Fenja Zell, Julia Mannheim, Melanie Grehn, Magdalena Rafecas

P08

3D printing of active medical implants

Miguel Pereira Madureira, Stefan Gassman, Theodor Doll

P09

Mechanical and dimensional characterization of multi-material additive manufactured parts

Markus Königshofer, Martin Stoiber, Ewald Unger, Christian Grasl, Francesco Moscato

P10

Fabrication of a flexible stenosis phantom for flow measurements using additive manufacturing

Alina Ibbeken, Pragathi Gurumurthy, Fenja Zell, Christina Hagen, Thorsten M. Buzug

P11

Dimensional accuracy of 3D printing of PEGDA parts using Digital Light Processing technology

Robert Mau, Jamal Nazir, Hermann Seitz

P12

3D printed measurement phantoms for evaluation of magnetic particle imaging scanner

Silvio Dutz, Anton Stang, Lucas Wöckel, Diana Zahn, Cordula Grüttner, Norbert Löwa, Olaf Kosch, Frank Wiekhorst

P13

Stereolithographic 3D printing (SLA 3DP) of pharmaceutical tablets: 3DP tablets

Eng Leong Tan, Paul Ho

P14

Hot Melt Extrusion and 3D-Printing of different PVA-Qualities

Julius Krause, Linus Großmann, Werner Weitschies

P15

Utilization of cryogenic temperatures to reduce line width variability in 3D bioprinted hydrogel lattices

Linnea Warburton, Catherine Liu, Kunal Dharmadhikari, Pavan Vemulakonda, Yahya Cheema, Neal Kewelramani, Danielle Sidelnikov, Kevin Aroom, Lester Schultheis

P16

PMMA and PVP based polymers for stereolitho-graphic manufacture of tailored drug release

Katharina Wulf, Celine Riess, Natalia Dominika Rekowska, Thomas Eickner, Hermann Seitz, Niels Grabow, Michael Teske

P17

Integration of subtractive 3D printing into micromolding of biodegradable implants for spinal cord treatment

Jana Marina von Poblotzki, Hoc Khiem Trieu

16:45 - 18:30

16:45 - 18:30
Session 06: Industrial Developments and Regulatory Affairs
Chair: Heike Wachenhausen, Wachenhausen Rechtsanwälte, Lübeck

S06T01

3D printing and medical devices: a challenge for legislation?

Heike Wachenhausen

S06T03

Selective laser melting for the production of surgical implants

Philip Oris

S06T02

3D image-based methods for investigating additive manufactured spinal implants

Kerim Genc, Denis Feindt, Ali Kiapour, Herminso Gomez, Patrick Tompsett, David Milner, Yunjie Wang, Philippe Young

S06T04

Hybrid additive-subtractive fs laser 3D fabrication of medical devices

Linas Jonusauskas, Tomas Baravykas, Titas Tickunas, Agne Butkute, Tomas Gadisauskas, Dovile Andrijec

S06T05

Medical AM of High Performance Plastics at the Point-of-Care

Stefan Leonhardt, Franz Bauer

S06T06

Elaboration of polyvalent material from polymer compound for tissue engineering by stereolithography

Thomas Brossier, Gaël Volpi, Sébastien Blanquer, Vincent Lapinte

S06T07

Medical 3D printing at point of care: Spotlights on software, hardware and processes

Martin Herzmann, Christoph Trautner

18:30

18:30
Get-Together

From
08:30 - 09:00

From 08:30 - 09:00
Registration

09:00 - 10:00

09:00 - 10:00
Session 07: Scaffolds, Implants and Drug delivery systems I
Chair: Linas Jonusauskas, Femtika, Vilnius

S07T01

Polymer-ceramic bone bricks for tissue engineering

Evangelos Daskalakis, Benedict Smith, Enes Aslan, Fengyuan Liu, Glen Cooper, Andrew Weightman, Bahattin Koc, Gordon Blunn, Paulo Bartolo

S07T02

PEOT-PBT and poly(ester urethane) microwell scaffolds for extrahepatic islet transplantation

Elahe Hadavi, Ian Gibson

S07T03

3D printing of smart materials for bone regeneration

Christian Polley, Thomas Distler, David Rüffer, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz

S07T04

Development of an electrospinning jet control technique for manufacturing vascular grafts

Christian Grasl, Michael Desch, Martin Helmut Stoiber, Francesco Moscato, Heinrich Schima

10:00 - 10:30

10:00 - 10:30
Session 08: Keynote
Chair: Thorsten M. Buzug, University of Lübeck

S08K01

Intellectual Property: Assessment of Additive Manufacturing as new Legal Category

Marc Wachenhausen

S08K01

CV: Marc Wachenhausen holds a degree in engineering and is a German and European patent attorney. He has been working in the field of intellectual property law since 2000 and has been running a patent law office in Munich since 2016, specialisi

10:30 - 11:00

10:30 - 11:00
Coffee

11:00 - 12:30

11:00 - 12:30
Session 09: Scaffolds, Implants and Drug Delivery Systems II
Chair: Ewald Unger, Medical University of Vienna

S09T01

AM of degradable Mg-implants by sintering

Thomas Ebel, Martin Wolff, Hendrik Buresch, Wolfgang Limberg, Christian Born, Regine Willumeit-Römer

S09T02

3D printing of hydrogel scaffolds based on poly(ethylene glycol) diacrylate

Sven Frank Klimaschewski, Mark Vehse

S09T03

3D-printed PEGDA structure with multiple depots for advanced drug delivery systems

Jan Konasch, Alexander Riess, Robert Mau, Michael Teske, Natalia Rekowska, Thomas Eickner, Niels Grabow, Hermann Seitz

S09T04

Development of patient-specific drug-releasing round window implants for the treatment of inner ear diseases

Farnaz Matin, Ziwen Gao, Verena Scheper, Samuel John, Thomas Lenarz

S09T05

Robust cost modelling for ink-jetted pharmaceuticals

Jin Ding, Martin Baumers, Ricky Wildman

S09T06

Additive manufacturing of superparamagnetic micro-devices for magnetic actuation

Anna C. Bakenecker, Ievgeniia Topolniak, Kerstin Lüdtke-Buzug, Brian R. Pauw, Thorsten M. Buzug

12:30 - 13:30

12:30 - 13:30
Lunch

13:30 - 14:45

13:30 - 14:45
Session 10: Material Properties and Structural Design
Chair: Francesco Moscato, Medical University of Vienna

S10T01

Fatigue behavior and morphology in Selective Laser Melted Ti-6Al-4V cellular materials

Michele Dallago, Valerio Luchin, Gianluca Zappini, Sunil Raghavendra, Damiano Pasini, Matteo Benedetti

S10T02

Hybrid solid-porous titanium scaffolds: Fabrication and post processing after selective laser melting

Bartlomiej Adam Wysocki, Agnieszka Chmielewska, Łukasz Żrodowski, Wojciech Święszkowski

S10T03

Measuring porosity of 3d printed structures using pycnometry

Kevin Aroom, Linnea Warburton, William Bentley, Lester Schultheis

S10T05

3D printing in PEEK-based medical devices

Mojtaba Tafaoli-Masoule, Mohsen Shakeri, S. Abolfazl Zahedi, Mohammad Vaezi, Hermann Seitz

S10T06

Laser metal fusion of beta Ti 21S alloy

Alireza Jam, Massimo Pellizzari, Matteo Benedetti

14:45 - 15:45

14:45 - 15:45
Session 11: Coffee and Posters (P18-P34)

P18

Quality assurance of printed materials using x-ray diffraction

Kevin Aroom, Peter Y Zavalij, Huapeng Huang, Lex Schultheis

P19

Investigation of cell dynamics in 3D cell spheroids and cell interaction with 3D printed scaffolds by mOCT

Tabea Kohlfaerber, Shujun Ding, Ramtin Rahmanzadeh, Thomas Jüngst, Jürgen Groll, Hinnerk Schulz-Hildebrandt, Gereon Hüttmann

P20

Feasibility of 3D printing for customized radiotherapeutic models to be used in superficial skin cancer therapy

Ali Pashazadeh, Nathan Castro, Elena Morganti, Marie-Luise Wille, Axel Boese, Dietmar Hutmacher, Michael Friebe

P21

Surface anatomy leading to personalized surface applicator: 3D printing for brachytherapy of skin tumors

Ali Pashazadeh, Axel Boese, Michael Friebe

P22

Implementation of a test rig to characterize the process suitability of filaments for 3D printing

Volker Weißmann, Jan Eric Schimmöller, Harald Hansmann, Nico Laufer, Stefan Ofe

P23

Differential Fast Scanning Calorimetry as analytical tool for mimicking melting and solidification in additive manufacturing

Bin Yang, Sinah Malz, Evgeny Zhuravlev, Benjamin Milkereit, Christoph Schick, Olaf Kessler

P24

Innovative revolving biopsy device design supported by additive manufacturing

Marwah Maatoq Al-Maatoq, Asmita doshi, Marco Kalmar, Axel Boese, Michael Friebe

P25

The challenge of repeatable manufacturing and the influence on the anchoring strength at the example of press-fit acetabular cups

Volker Weißmann, Harald Hansmann, Rainer Bader, Christian Boss, Anton du Plessis

P26

Mechanical and rheological characterization of hydrogels and hydrogel precursors for cartilage tissue engineering and biofabrication

Alina Weizel, Thomas Distler, Christian Polley, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz

P27

Development of patient-specific, long-lasting bioabsorbable sinus implants in patients with chronic frontal sinusitis

Constantin Weber, Thomas Lenarz, Verena Scheper, Samuel John, Ziwen Gao

P28

Assessing the performance of upper limb prostheses with virtual evaluation

Chung Han Chua, Ruth Goodridge, Steve Benford, Ian Ashcroft

P29

From a static to a dynamic 3D anatomical phantom of a rat

Patryk Szwargulski, Miriam Exner, Peter Ludewig, Tobias Knopp, Matthias Graeser

P30

3D printed capsules for colon targeted drug delivery

Regine Beeck, Dariah-Sohreh Seradj, Werner Weitschies

P31

Additive manufacturing of magnetic polymer phantoms for magnetic particle imaging

Norbert Löwa, Benjamin Godau, Dirk Gutkelch, Hendrik Paysen, Axel Kuhn, Michael Herzog, Frank Wiekhorst

P32

Long-term imaging of cell growth and cell death in three-dimensional cell cultures

Nina Hedemann, Andreas Herz, Reinhild Geisen, Nils Tribian, Alexander Thomas, Lutz Kloke, Ben Werdelmann, Marion van Mackelenbergh, Nicolai Maass, Dirk Bauerschlag

P33

FDM 3D printing of immediate release tablets loaded with an acid- and thermo-labile drug

Vanessa Domsta, Wiebke Kempin, Georg Grathoff, Iris Brecht, Beatrice Semmling, Susan Tillmann, Werner Weitschies, Anne Seidlitz

P34

Design and evaluation of 3D printed objects regarding form stability

Jan Stelzner, Victoria Gerant, Sara Schonebeck, Mareike Stender, Thorsten M. Buzug

15:45 - 17:00

15:45 - 17:00
Session 12: Phantoms
Chair: Ludger Tüshaus, University Medical Center (UKSH) Lübeck

S12T01

A 3D printed patient-specific dual compartment breast phantom for validating MRI acquisition and analysis techniques

Nicole Wake, Carlotta Ianniello, Ryan Brown, Jerzy Walczyk, Linda Moy, Christopher Collins, Henry Rusinek

S12T02

Additive manufacturing: A growing platform to replace, reduce and refine animal experiments

Gunpreet Oberoi

S12T03

An Endovascular Simulator based on Exchangeable 3D-printed Real Vascular Pathologies as Alternative to the use of Animals

Mark Kaschwich, Florian Matysiak, Juljan Bouchagiar, Annika Dell, Andreas Bayer, Marco Horn, Markus Kleemann

S12T04

Phantom development for a magnetic particle imaging head scanner

Matthias Graeser, Patryk Szwargulski, Nadine Gdaniec, Franziska Werner, Florian Thieben, Tobias Knopp

S12T05

Construction of a highly flexible head and neck phantom

Melanie Grehn, Christian Ziemann, Maik Stille, Florian Cremers, Dirk Rades, Thorsten M. Buzug

17:00

17:00
Wrap-up and Farewell

P01

Modeling of a functional brace using the finite element method

Mohammed Alqahtani, Abdalla Omar, Glen Cooper, Paulo Bartolo

P02

High-precision, patient-specific 3D models of brain aneurysms for therapy planning and training in interventional neuroradiology

Hannes Schwenke, Peter Schramm, André Kemmling

P03

Evaluation of 3D-printing materials for the simulation of osteotomies

Thomas Friedrich, Helen Abi-Chokami, Maximilian Wattenberg, Thorsten M. Buzug

P04

Optical recognition of error states to secure quality in FDM 3d Printing

Janik Klingert, Ralf Bruder, Achim Schweikard

P05

Rapid prototyping of an elastic bladder model for in-vitro simulation of the transurethral resection of the prostate

Christian Damiani, Torben Dorbandt, Stephan Klein, Christoph Knopf

P06

Towards a digital process chain for the automated manufacturing of pediatric orthoses: State of the art, challenges and new approaches

Quirin T. Schmid, Christina M. Hein, Kyra Kleine, Konstantin Struebig,Yannick S. Krieger, Tim C. Lueth

P07

3D-printed standardized phantoms for small animal PET and MRI: a comparison study

Fenja Zell, Julia Mannheim, Melanie Grehn, Magdalena Rafecas

P08

3D printing of active medical implants

Miguel Pereira Madureira, Stefan Gassman, Theodor Doll

P09

Mechanical and dimensional characterization of multi-material additive manufactured parts

Markus Königshofer, Martin Stoiber, Ewald Unger, Christian Grasl, Francesco Moscato

P10

Fabrication of a flexible stenosis phantom for flow measurements using additive manufacturing

Alina Ibbeken, Pragathi Gurumurthy, Fenja Zell, Christina Hagen, Thorsten M. Buzug

P11

Dimensional accuracy of 3D printing of PEGDA parts using Digital Light Processing technology

Robert Mau, Jamal Nazir, Hermann Seitz

P12

3D printed measurement phantoms for evaluation of magnetic particle imaging scanner

Silvio Dutz, Anton Stang, Lucas Wöckel, Diana Zahn, Cordula Grüttner, Norbert Löwa, Olaf Kosch, Frank Wiekhorst

P13

Stereolithographic 3D printing (SLA 3DP) of pharmaceutical tablets: 3DP tablets

Eng Leong Tan, Paul Ho

P14

Hot Melt Extrusion and 3D-Printing of different PVA-Qualities

Julius Krause, Linus Großmann, Werner Weitschies

P15

Utilization of cryogenic temperatures to reduce line width variability in 3D bioprinted hydrogel lattices

Linnea Warburton, Catherine Liu, Kunal Dharmadhikari, Pavan Vemulakonda, Yahya Cheema, Neal Kewelramani, Danielle Sidelnikov, Kevin Aroom, Lester Schultheis

P16

PMMA and PVP based polymers for stereolitho-graphic manufacture of tailored drug release

Katharina Wulf, Celine Riess, Natalia Dominika Rekowska, Thomas Eickner, Hermann Seitz, Niels Grabow, Michael Teske

P17

Integration of subtractive 3D printing into micromolding of biodegradable implants for spinal cord treatment

Jana Marina von Poblotzki, Hoc Khiem Trieu

P18

Quality assurance of printed materials using x-ray diffraction

Kevin Aroom, Peter Y Zavalij, Huapeng Huang, Lex Schultheis

P19

Investigation of cell dynamics in 3D cell spheroids and cell interaction with 3D printed scaffolds by mOCT

Tabea Kohlfaerber, Shujun Ding, Ramtin Rahmanzadeh, Thomas Jüngst, Jürgen Groll, Hinnerk Schulz-Hildebrandt, Gereon Hüttmann

P20

Feasibility of 3D printing for customized radiotherapeutic models to be used in superficial skin cancer therapy

Ali Pashazadeh, Nathan Castro, Elena Morganti, Marie-Luise Wille, Axel Boese, Dietmar Hutmacher, Michael Friebe

P21

Surface anatomy leading to personalized surface applicator: 3D printing for brachytherapy of skin tumors

Ali Pashazadeh, Axel Boese, Michael Friebe

P22

Implementation of a test rig to characterize the process suitability of filaments for 3D printing

Volker Weißmann, Jan Eric Schimmöller, Harald Hansmann, Nico Laufer, Stefan Ofe

P23

Differential Fast Scanning Calorimetry as analytical tool for mimicking melting and solidification in additive manufacturing

Bin Yang, Sinah Malz, Evgeny Zhuravlev, Benjamin Milkereit, Christoph Schick, Olaf Kessler

P24

Innovative revolving biopsy device design supported by additive manufacturing

Marwah Maatoq Al-Maatoq, Asmita doshi, Marco Kalmar, Axel Boese, Michael Friebe

P25

The challenge of repeatable manufacturing and the influence on the anchoring strength at the example of press-fit acetabular cups

Volker Weißmann, Harald Hansmann, Rainer Bader, Christian Boss, Anton du Plessis

P26

Mechanical and rheological characterization of hydrogels and hydrogel precursors for cartilage tissue engineering and biofabrication

Alina Weizel, Thomas Distler, Christian Polley, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz

P27

Development of patient-specific, long-lasting bioabsorbable sinus implants in patients with chronic frontal sinusitis

Constantin Weber, Thomas Lenarz, Verena Scheper, Samuel John, Ziwen Gao

P28

Assessing the performance of upper limb prostheses with virtual evaluation

Chung Han Chua, Ruth Goodridge, Steve Benford, Ian Ashcroft

P29

From a static to a dynamic 3D anatomical phantom of a rat

Patryk Szwargulski, Miriam Exner, Peter Ludewig, Tobias Knopp, Matthias Graeser

P30

3D printed capsules for colon targeted drug delivery

Regine Beeck, Dariah-Sohreh Seradj, Werner Weitschies

P31

Additive manufacturing of magnetic polymer phantoms for magnetic particle imaging

Norbert Löwa, Benjamin Godau, Dirk Gutkelch, Hendrik Paysen, Axel Kuhn, Michael Herzog, Frank Wiekhorst

P32

Long-term imaging of cell growth and cell death in three-dimensional cell cultures

Nina Hedemann, Andreas Herz, Reinhild Geisen, Nils Tribian, Alexander Thomas, Lutz Kloke, Ben Werdelmann, Marion van Mackelenbergh, Nicolai Maass, Dirk Bauerschlag

P33

FDM 3D printing of immediate release tablets loaded with an acid- and thermo-labile drug

Vanessa Domsta, Wiebke Kempin, Georg Grathoff, Iris Brecht, Beatrice Semmling, Susan Tillmann, Werner Weitschies, Anne Seidlitz

P34

Design and evaluation of 3D printed objects regarding form stability

Jan Stelzner, Victoria Gerant, Sara Schonebeck, Mareike Stender, Thorsten M. Buzug

We are using cookies.

Privacy settings

Required Cookies

Cookies for external Content