Login / Registration
 Set password
 Link to registration
  • Home
    • Committees
    • Previous Conferences
      • AMMM 2022
        • Program
        • Keynotes 2022
        • Program Booklet 2022
      • AMMM 2021
        • Program
        • Keynotes
        • Contributions
        • Support and Partners 2021
      • AMMM 2020
        • Home AMMM 2020
        • Keynotes
        • Contributions
        • Support and Partners 2020
      • AMMM 2019
        • Home AMMM 2019
        • Impressions 2019
        • Contributions
        • Support and Partners 2019
  • Submissions
    • Submission of Contributions
    • Topics
    • Keynotes 2022
    • Program Booklet 2022
  • Registration
  • Livestream
  • Venue and Travel
  • Media
    • Transactions on AMMM
  • Support
  • Contact
    • Mailing List
  • Home
    • Committees
    • Previous Conferences
      • AMMM 2022
        • Program
        • Keynotes 2022
        • Program Booklet 2022
      • AMMM 2021
        • Program
        • Keynotes
        • Contributions
        • Support and Partners 2021
      • AMMM 2020
        • Home AMMM 2020
        • Keynotes
        • Contributions
        • Support and Partners 2020
      • AMMM 2019
        • Home AMMM 2019
        • Impressions 2019
        • Contributions
        • Support and Partners 2019
  • Submissions
    • Submission of Contributions
    • Topics
    • Keynotes 2022
    • Program Booklet 2022
  • Registration
  • Livestream
  • Venue and Travel
  • Media
    • Transactions on AMMM
  • Support
  • Contact
    • Mailing List

Scientific Program

The conference was accredited by the Ärztekammer SH with 12 CME points. 

Program (PDF)

Keywords or persons can be found via the search window below this text. Please follow the indiviidual links on each title for abstract or paper in Transaction on AMMM.

12:00 (CEST)
12:00 (CEST)
Networking and Industrial Exhibition
Please visit the exhibition and the networking café.
13:00 (CEST)
13:00 (CEST)
Welcome Note
Thorsten M. Buzug (Fraunhofer IMTE, Germany) / Hermann Seitz (Universty of Rostock, Germany)
13:05 (CEST)
13:05 (CEST)
Greetings
Thorsten M. Buzug (Fraunhofer IMTE, Germany) / Hermann Seitz (Universty of Rostock, Germany)
13:10 (CEST)
13:10 (CEST)
Keynote 1: 3D Printing in Spine Surgery: Current and Emerging Applications
Naresh Kumar (National University of Singapore)

Chairs: Thorsten M. Buzug (Fraunhofer IMTE, Germany) / Shweta Agarwala (Aarhus University, Denmark)
Keynote starts at 07:10 EDT (NYC), 19:10 SGT (SGP), 13:10 CEST (GER).
13:40 (CEST)
13:40 (CEST)
Session 1: Scaffolds, Implants and Drug Delivery Systems I
Chairs: Thorsten M. Buzug (Fraunhofer IMTE, Germany) /Shweta Agarwala (Aarhus University, Denmark)
Session starts at 07:40 EDT (NYC), 19:40 SGT (SGP), 13:40 CEST (GER).
13:40
13:40
Osteointegration of 3D-printed bone plates  (ID 561)
Lina Yan, Aleksandar Kostadinov, Ming-You Xie, Gavin O'Neill
14:00
14:00
Advances in manufacturing spinal cord implant using 3D selective laser induced etching of fused silica  (ID 574)
Lukas Rennpferdt, Sven Bohne, Hoc Khiem Trieu
14:20
14:20
Development of in vitro 3D brain models on laser fabricated scaffolds  (ID 532)
Anastasia Koroleva, Ayman El-Tamer, Andrea Deiwick , Lothar Koch, Jordi Soriano, Ulf Hinze, Boris Chichkov
14:40
14:40
Napoleons second life  (ID 514)
Andreas Gebhardt
15:00
15:00
3D printing of individualized cranial PEEK implants – saving costs and following regulatory pathways  (ID 491)
Sebastian Pammer, Martin Herzmann
15:20 (CEST)
15:20 (CEST)
Industrial Exhibition and Coffee Break
Please visit the exhibition and the networking café.
15:50 (CEST)
15:50 (CEST)
Keynote 2: Natural-based bioinks for the manufacturing of biomimetic constructs
Ana Ferreira-Duarte (Newcastle University, UK)

Chairs: Thomas Friedrich (Fraunhofer IMTE, Gemrany) / Sebastian Pammer (Kumovis, Germany)
Keynote starts at 09:50 EDT (NYC), 21:50 SGT (SGP), 15:50 CEST (GER).
16:20 (CEST)
16:20 (CEST)
Session 2: Material Properties, Structural Design, and Printing Technologies I
Chairs: Thomas Friedrich (Fraunhofer IMTE, Gemrany) / Sebastian Pammer (Kumovis, Germany)
Session starts at 10:20 EDT (NYC), 22:20 SGT (SGP), 16:20 CEST (GER).
16:20
16:20
Prediction of elastic material properties in additively fabricated multimaterials  (ID 569)
Erik Kornfellner, Francesco Moscato
16:40
16:40
Powder-bed 3D printing meets orthopedic rehabilitation devices  (ID 524)
Fatemeh Mehdipour, Hassan Shirzadi Jahromi
17:00
17:00
Printing of hard ferromagnetic materials for remote magnetic actuation  (ID 567)
Justin Ackers, Anna C. Bakenecker, Thorsten M. Buzug, Matthias Graeser
17:20
17:20
Atmospheric plasma sources for surface modifications in 3d printed scaffolds  (ID 571)
Thomas Neubert, Kristina Lachmann, Michael Thomas, Paolo Scopece, Lorenzo Moroni, Alessandro Patelli
17:40
17:40
Rapid tooling for micro injection molding of micro medical devices via digital light processing  (ID 537)
Robert Mau, Gabór Jüttner, Ziwen Gao, Farnaz Matin, Dorian Alcacer Labrador, Felix Repp, Samuel John, Verena Scheper, Thomas Lenarz, Hermann Seitz
18:00 (CEST)
18:00 (CEST)
Keynote 3: Additive manufacturing for bone regeneration: Convergence of knowledge
Susmita Bose (Washington State University, USA)

Chair: Hermann Seitz (University of Rostock, Germany)
Keynote starts at 12:00 EDT (NYC), 00:00 SGT (SGP), 18:00 CEST (GER).
18:30 (CEST)
18:30 (CEST)
Closing Day 1 | Announcements
Thorsten M. Buzug / Hermann Seitz
10:55 (CEST)
10:55 (CEST)
Opening Day 2
Thorsten M. Buzug / Hermann Seitz
11:00 (CEST)
11:00 (CEST)
Keynote 4: Additive manufacturing of nitinol stents for medical applications: current status and future prospects
Jerry Fuh (National University of Singapore)

Chairs: Thomas Friedrich (Fraunhofer IMTE, Gemrany) / Björn Petersen (Materialise, Germany)
Keynote starts at: 05:00 EDT (NYC), 17:00 SGT (SGP), 11:00 CEST (GER).
11:30 (CEST)
11:30 (CEST)
Session 3: Medical Aids and Devices / Diagnostics and Therapy I
Chairs: Thomas Friedrich (Fraunhofer IMTE, Gemrany) / Björn Petersen (Materialise, Germany)
Session starts at: 05:30 EDT (NYC), 17:30 SGT (SGP), 11:30 CEST (GER).
11:30
11:30
Novel 3D printed custom kinesiology tape for variable usage scenarios  (ID 540)
Abigail Duckworth, Andrew Gleadall, Richard Bibb
11:50
11:50
3D Printed Surgical Guides for Distal Femoral Osteotomy  (ID 573)
Nikhil Belsure, Taral Nagda, Sagar Parekh
12:10
12:10
Design and 3D-printing of a rinsing chamber for hydrostatic high-pressure treated allogeneic tissues  (ID 522)
Mathias Lorenz, Christoph Drobek, Daniela Schwerdt, Rainer Bader, Hermann Seitz
12:30
12:30
How AI is enabling Mass Personalization in Healthcare  (ID 605)
Pieter Slagmolen, Bjoern Petersen
12:50
12:50
Educating biomedical 3D printing engineers  (ID 512)
Samuel Thrysøe
13:10 (CEST)
13:10 (CEST)
Industrial Exhibition and Coffee Break
Please visit the exhibition and the networking café.
13:55 (CEST)
13:55 (CEST)
Keynote 5: Blending computation and additive manufacturing for de novo materials design
Flavia Libonati (University of Genova, Italy)

Chairs: Ana Ferreira-Duarte (Newcastle University, UK ) / Hermann Seitz ((Universty of Rostock, Germany)
Keynote starts at: 07:55 EDT (NYC), 19:55 SGT (SGP), 13:55 CEST (GER).
14:25 (CEST)
14:25 (CEST)
Session 4: Material Properties, Structural Designs, and Printing Technologies II
Chairs: Ana Ferreira-Duarte (Newcastle University, UK ) / Hermann Seitz ((Universty of Rostock, Germany
Session starts at: 08:25 EDT (NYC), 20:25 SGT (SGP), 14:25 CEST (GER).
14:25
14:25
Design of finger joint implants based on triply periodic minimal surfaces  (ID 497)
Yannick Marian Löw, Arthur Seibel
14:45
14:45
Bioactivity assessment of additively manufactured doped-HA composite scaffolds for bone tissue engineering  (ID 521)
Swati Jindal, Cecile Serenelli, Elena Mancuso
15:05
15:05
Tensile properties of polyamide 12 / black with 10wt.% copper samples manufactured by laser powder bed fusion  (ID 525)
Winston Kagisho Curtis Wolf, Anna Martín Vilardell, Anton Du Plessis, Ina Yadroitsava, Igor Yadroitsev
15:25
15:25
3D Printing of Biodegradable Poly(L-lactide)/Hydroxyapatite Composite by Composite Extrusion Modeling  (ID 519)
Philip Töllner, William Brandes, Christian Polley, Benjamin Eichler, Hermann Seitz
15:45
15:45
Scaling precision and build rate in additively manufactured components by melt pool control  (ID 496)
Alexander Großmann, Maximilian Klyk, Leonie Kohn, Christian Mittelstedt
16:05 (CEST)
16:05 (CEST)
Industrial Exhibition and Coffee Break
Please visit the exhibition and the networking café.
16:25 (CEST)
16:25 (CEST)
Keynote 6: Medical product development through additive manufacturing
Igor Yadroitsev (Central University of Technology, South Africa)

Chairs: Flavia Libonati (University of Genova, Italy) / Stefan Ritt (Speed3D, Germany)
Keynote starts at: 10:25 EDT (NYC), 22:25 SGT (SGP), 16:25 CEST (GER).
16:55 (CEST)
16:55 (CEST)
Session 5: Imaging and Modelling in 3D Printing
Chairs: Flavia Libonati (University of Genova, Italy) / Stefan Ritt (Speed3D, Germany)
Session starts at: 10:55 EDT (NYC), 22:55 SGT (SGP), 16:55 CEST (GER).
16:55
16:55
3D printing of liver models to assist difficult surgical operations  (ID 584)
Ion-Anastasios Karolos, Vasillios Tsioukas, Christos Pikridas
17:15
17:15
Optimized 3D printed wheelchair racing gloves  (ID 565)
James Willmott, Darren Watts
17:35
17:35
3D Printing of Complex Surgical Cases: Spina Bifida  (ID 579)
Fluvio Lobo Fenoglietto, James Inziello, Kristin Stubbs, Robert Sims, Jack Stubbs, Cole Greves, Samer Elbabaa
17:55
17:55
Design and construction of a flexible pharyngeal phantom  (ID 499)
Alina Ibbeken, Christina Hagen, Fenja Zell, Armin Steffen, Ulrike Grzyska, Alex Frydrychowicz, Thorsten M. Buzug
18:15
18:15
Body part surrogates for safety research  (ID 559)
Andrey Koptyug, Nicola Petrone, Mikael Bäckström
18:35 (CEST)
18:35 (CEST)
Closing Day 2 | Announcements
Thorsten M. Buzug / Hermann Seitz
10:55 (CEST)
10:55 (CEST)
Opening Day 3
Thorsten M. Buzug / Hermann Seitz
11:00 (CEST)
11:00 (CEST)
Keynote 7: Advances in customized craniofacial reconstruction using 3D printing of titanium alloy
Maurice Mommaerts (European Face Centre, Universitair Ziekenhuis Brussel, Belgium)

Chairs: Hermann Seitz (University of Rostock, Germany) / Shweta Agarwala (Aarhus University, Denmark)
Keynote starts at: 05:00 EDT (NYC), 17:00 SGT (SGP), 11:00 CEST (GER).
11:30 (CEST)
11:30 (CEST)
Session 6: Scaffolds, Implants and Drug Delivery Systems II
Chairs: Hermann Seitz (University of Rostock, Germany) / Shweta Agarwala (Aarhus University, Denmark)
Session starts at: 05:30 EDT (NYC), 17:30 SGT (SGP), 11:30 CEST (GER).
11:30
11:30
The development of Hypromellose based semisolid 3D printing inks for drug delivery  (ID 541)
Bin Zhang, Xinyi Teoh, Peter Belton, Andy Gleadall, Richard Bibb, Sheng Qi
11:50
11:50
Effect of disintegrants and tablet infill on release behaviour of 3D printed tablets  (ID 501)
Laura Müller, Julius Krause, Werner Weitschies
12:10
12:10
Design and characterization of AM sensorized capsules for drug delivery devices  (ID 504)
Marta Graziano, David William Charig, Nicola Di Trani, Alessandro Grattoni, Giorgio De Pasquale
12:30
12:30
Design and manufacturing workflow of a patient specific 3-dimensionally engineered tracheo-bronchial stent  (ID 568)
Markus Königshofer, Ewald Unger, Martin Stoiber, György Lang, Thomas Schweiger, Francesco Moscato
12:50
12:50
Fabrication of a steerable magnetic micro-robot  (ID 570)
Anna C. Bakenecker, Anselm von Gladiss, Hannes Schwenke, André Behrends, Thomas Friedrich, Kerstin Lüdtke-Buzug, Alexander Neumann, Zuzana Penxová, Joerg Barkhausen, Franz Wegner, Thorsten M. Buzug
13:10 (CEST)
13:10 (CEST)
Industrial Exhibition and Coffee Break
Please visit the exhibition and the networking café.
13:30 (CEST)
13:30 (CEST)
Keynote 8: Additive manufacturing in the Life Sciences – needs-based research in cooperation
Cecilia Persson (University Uppsala, Sweden)

Chair: Francesco Moscato (University of Vienna, Austria)
Keynote starts at: 07:30 EDT (NYC), 19:30 SGT (SGP), 13:30 CEST (GER).
14:00 (CEST)
14:00 (CEST)
Session 7: Medical Aids and Devices / Diagnostics and Therapy II
Chair: Francesco Moscato (University of Vienna, Austria)
Session starts at: 08:00 EDT (NYC), 20:00 SGT (SGP), 14:00 CEST (GER).
14:00
14:00
Digital assistance for mobile 3D-printing of medical supplies  (ID 506)
Maximilian Vogt, Kevin Janzen, Antje Voßhenrich, Julia Lakämper, Robert Lau
14:20
14:20
Assessment of heart valve frame manufactured by laser powder bed fusion  (ID 495)
Xiao Zhao, Neil Bressloff, Matteo Bellin
14:40
14:40
Additively manufactured nasopharyngeal swabs for the use in Covid-19 testing  (ID 515)
Konstantin Rybalcenko, Luis Folgar, Giorgio Ioannides, Mehdi Salahshour, Norbert Heizer, Joseph Crabtree
15:00
15:00
Design and 3D printing of miniaturized dialyzers for laboratory use  (ID 545)
Horst Krüsemann, Philip Töllner, Erik Westphal, Jacqueline Hofrichter, Hermann Seitz
15:20
15:20
Regulatory Framework for 3D Printed Custom-Made Devices in Europe  (ID 542)
Ann-Kathrin Carl, David Hochmann
15:40 (CEST)
15:40 (CEST)
Industrial Exhibition and Coffee Break
Please visit the exhibition and the networking café.
15:55 (CEST)
15:55 (CEST)
Keynote 9: Reshaping wearable tech for healthcare through printed electronics
Shweta Agarwala (Aarhus University, Denmark)

Chairs: Cecilia Persson (University Uppsala, Sweden) / Jack Stubbs (Digital Anatomy Simulations for Healthcare, USA)
Keynote starts at: 09:55 EDT (NYC), 21:55 SGT (SGP), 15:55 CEST (GER).
16:25 (CEST)
16:25 (CEST)
Session 8: Medical Phantoms for Planning, Training and Quality Assurance
Chairs: Cecilia Persson (University Uppsala, Sweden) / Jack Stubbs (Digital Anatomy Simulations for Healthcare, USA)
Session starts at: 10:25 EDT (NYC), 22:25 SGT (SGP), 16:25 CEST (GER).
16:25
16:25
Stenosis simulation of femoral arteries using an adaptive 3D-printed actuator  (ID 576)
Annika Dell, Franz Wegner, Eric Aderhold, Thorsten M. Buzug, Thomas Friedrich
16:45
16:45
Advanced training scenarios for liver surgery with realistic interactive 3D-printed phantoms  (ID 502)
Hans Nopper, Olav Schendel, Fatma Karayagiz, Ubiratan Freitas, Thomas Lück, Tim Stadie, Marie Lampe, Anke Reinschluessel, Tanja Doering, Daniela Salzmann, Dirk Weyhe
17:05
17:05
Modular simulation of neuroangiography and endovascular interventions in neuroradiology  (ID 578)
Hannes Schwenke, Thorsten M. Buzug, Peter Schramm, Thomas Friedrich
17:25
17:25
Indirectly additive manufactured deformable bladder model for a pelvic radiotherapy phantom  (ID 498)
Marie Wegner, Elisabetta Gargioni, Dieter Krause
17:45
17:45
Creation of a 3D printed human head phantom  (ID 608)
Solveig Thrun, David Pedrosa, Maximilian Schulze , Thorsten Buzug, Maik Stille
18:05 (CEST)
18:05 (CEST)
Closing Remarks
Thorsten M. Buzug (Fraunhofer IMTE, Germany) / Hermann Seitz (Universty of Rostock, Germany)
Session starts at: 12:05 EDT (NYC), 00:05 SGT (SGP), 18:05 CEST (GER).
491
491
3D printing of individualized cranial PEEK implants – saving costs and following regulatory pathways
Martin Herzmann
495
495
Assessment of heart valve frame manufactured by laser powder bed fusion
Xiao Zhao, Neil Bressloff, Matteo Bellin
496
496
Scaling precision and build rate in additively manufactured components by melt pool control
Alexander Großmann, Maximilian Klyk, Leonie Kohn, Christian Mittelstedt
497
497
Design of finger joint implants based on triply periodic minimal surfaces
Yannick Marian Löw, Arthur Seibel
498
498
Indirectly additive manufactured deformable bladder model for a pelvic radiotherapy phantom
Marie Wegner, Elisabetta Gargioni, Dieter Krause
499
499
Design and construction of a flexible pharyngeal phantom
Alina Ibbeken, Christina Hagen, Fenja Zell, Armin Steffen, Ulrike Grzyska, Alex Frydrychowicz, Thorsten M. Buzug
501
501
Effect of disintegrants and tablet infill on release behaviour of 3D printed tablets
Laura Müller, Julius Krause, Werner Weitschies
502
502
Advanced training scenarios for liver surgery with realistic interactive 3D-printed phantoms
Hans Nopper, Olav Schendel, Fatma Karayagiz, Ubiratan Freitas, Thomas Lück, Tim Stadie, Marie Lampe, Anke Reinschluessel, Tanja Doering, Daniela Salzmann, Dirk Weyhe
504
504
Design and characterization of AM sensorized capsules for drug delivery devices
Marta Graziano, David William Charig, Nicola Di Trani, Alessandro Grattoni, Giorgio De Pasquale
505
505
3D printed patient specific artificial outer ear model for use in auricle reconstruction surgery: a clinical feasibility study
Farnaz Matin, Ziwen Gao, Paul Bronzlik, Thomas Lenarz, Verena Scheper
506
506
Digital assistance for mobile 3D-printing of medical supplies
Maximilian Vogt, Kevin Janzen, Antje Voßhenrich, Julia Lakämper, Robert Lau
512
512
Educating biomedical 3D printing engineers
Samuel Thrysøe
514
514
Napoleons second life
Andreas Gebhardt
515
515
Additively manufactured nasopharyngeal swabs for the use in Covid-19 testing
Konstantin Rybalcenko, Luis Folgar, Giorgio Ioannides, Mehdi Salahshour, Norbert Heizer, Joseph Crabtree
519
519
3D Printing of Biodegradable Poly(L-lactide)/Hydroxyapatite Composite by Composite Extrusion Modeling
Philip Töllner, William Brandes, Christian Polley, Benjamin Eichler, Hermann Seitz
521
521
Bioactivity assessment of additively manufactured doped-HA composite scaffolds for bone tissue engineering
Swati Jindal, Cecile Serenelli, Elena Mancuso
522
522
Design and 3D-printing of a rinsing chamber for hydrostatic high-pressure treated allogeneic tissues
Mathias Lorenz, Christoph Drobek, Daniela Schwerdt, Rainer Bader, Hermann Seitz
524
524
Powder-bed 3D printing meets orthopedic rehabilitation devices
Fatemeh Mehdipour, Hassan Shirzadi Jahromi
525
525
Tensile properties of polyamide 12 / black with 10wt.% copper samples manufactured by laser powder bed fusion
Winston Kagisho Curtis Wolf, Anna Martín Vilardell, Anton Du Plessis, Ina Yadroitsava, Igor Yadroitsev
532
532
Development of in vitro 3D brain models on laser fabricated scaffolds
Anastasia Koroleva, Ayman El-Tamer, Andrea Deiwick , Lothar Koch, Jordi Soriano, Ulf Hinze, Boris Chichkov
537
537
Rapid tooling for micro injection molding of micro medical devices via digital light processing
Robert Mau, Gabór Jüttner, Ziwen Gao, Farnaz Matin, Dorian Alcacer Labrador, Felix Repp, Samuel John, Verena Scheper, Thomas Lenarz, Hermann Seitz
540
540
Novel 3D printed custom kinesiology tape for variable usage scenarios
Abigail Duckworth, Andrew Gleadall, Richard Bibb
541
541
The development of Hypromellose based semisolid 3D printing inks for drug delivery
Bin Zhang, Xinyi Teoh, Peter Belton, Andy Gleadall, Richard Bibb, Sheng Qi
542
542
Regulatory Framework for 3D Printed Custom-Made Devices in Europe
Ann-Kathrin Carl, David Hochmann
545
545
Design and 3D printing of miniaturized dialyzers for laboratory use
Horst Krüsemann, Philip Töllner, Erik Westphal, Jacqueline Hofrichter, Hermann Seitz
559
559
Body part surrogates for safety research
Andrey Koptyug, Nicola Petrone, Mikael Bäckström
561
561
Osteointegration of 3D-printed bone plates
Lina Yan, Aleksandar Kostadinov, Ming-You Xie, Gavin O'Neill
565
565
Optimized 3D printed wheelchair racing gloves
James Willmott, Darren Watts
567
567
Printing of hard ferromagnetic materials for remote magnetic actuation
Justin Ackers, Anna Bakenecker, Thorsten Buzug, Matthias Graeser
568
568
Design and manufacturing workflow of a patient specific 3-dimensionally engineered tracheo-bronchial stent
Markus Königshofer, Ewald Unger, Martin Stoiber, György Lang, Thomas Schweiger, Francesco Moscato
569
569
Prediction of elastic material properties in additively fabricated multimaterials
Erik Kornfellner, Francesco Moscato
570
570
Fabrication of a steerable magnetic micro-robot
Anna C. Bakenecker, Anselm von Gladiss, Hannes Schwenke, André Behrends, Thomas Friedrich, Kerstin Lüdtke-Buzug, Alexander Neumann, Zuzana Penxová, Joerg Barkhausen, Franz Wegner, Thorsten M. Buzug
571
571
Atmospheric plasma sources for surface modifications in 3d printed scaffolds
Thomas Neubert, Kristina Lachmann, Michael Thomas, Paolo Scopece, Lorenzo Moroni, Alessandro Patelli
573
573
3D Printed Surgical Guides for Distal Femoral Osteotomy
Nikhil Belsure, Taral Nagda, Sagar Parekh
574
574
Advances in manufacturing spinal cord implant using 3D selective laser induced etching of fused silica
Lukas Rennpferdt, Sven Bohne, Hoc Khiem Trieu
576
576
Stenosis simulation of femoral arteries using an adaptive 3D-printed actuator
Annika Dell, Franz Wegner, Eric Aderhold, Thorsten M. Buzug, Thomas Friedrich
578
578
Modular simulation of neuroangiography and endovascular interventions in neuroradiology
Hannes Schwenke, Leonora Calopresti, Thorsten M. Buzug, Peter Schramm, Thomas Friedrich
579
579
3D Printing of Complex Surgical Cases: Spina Bifida
Fluvio Lobo Fenoglietto, James Inziello, Kristin Stubbs, Robert Sims, Jack Stubbs, Cole Greves, Samer Elbabaa
584
584
3D printing of liver models to assist difficult surgical operations
Ion-Anastasios Karolos, Vasillios Tsioukas, Christos Pikridas
595
595
Reshaping wearable tech for healthcare through printed electronics
Shweta Agarwala
596
596
Additive manufacturing of nitinol stents for medical applications: current status and future prospects
Jerry Fuh
597
597
Blending computation and additive manufacturing for de novo materials design
Flavia Libonati
598
598
Medical product development through additive manufacturing
Igor Yadroitsev
599
599
Advances in customized craniofacial reconstruction using 3D printing of titanium alloy
Maurice Mommaerts
600
600
Additive manufacturing for bone regeneration: Convergence of knowledge
Susmita Bose
601
601
Additive manufacturing in the Life Sciences – needs-based research in cooperation
Cecilia Persson
602
602
Natural-based bioinks for the manufacturing of biomimetic constructs
Ana Ferreira-Duarte
603
603
3D Printing in Spine Surgery: Current and Emerging Applications
Naresh Kumar
605
605
How AI is enabling mass personalization in healthcare
Pieter Slagmolen, Bjoern Petersen
608
608
Creation of a 3D printed human head phantom
Solveig Thrun, David Pedrosa, Maximilian Schulze , Thorsten Buzug, Maik Stille

© 2023 Infinite Science GmbH
  • Imprint
  • Privacy Policy
  • Sitemap
Cookie Settings
X

We are using cookies.

We are using cookies on this web page. Some of them are required to run this page, some are useful to provide you the best web experience.

I accept

Individual Cookie Settings

Only accept required cookies.

Privacy Notes Imprint

X

Privacy settings

Here is an overview of all cookies use

Required Cookies

These cookies are needed to let the basic page functionallity work correctly.

Show Cookie Informationen

Hide Cookie Information

TYPO3 System Cookies

Diese Cookies ermöglichen grundlegende Funktionen, die für die einwandfreie Nutzung der Website erforderlich sind.

Provider:TYPO3
Cookiename:be_*, fe_*
Runtime:Dauer der Session

Cookies for external Content

Content for Videoplatforms und Social Media Platforms will be disabled automaticly. To see content from external sources, you need to enable it in the cookie settings.

Show Cookie Informationen

Hide Cookie Information

Google Maps

Wird benutzt, um das Einbinden interaktiver Karten auf der Website zu ermöglichen.

Provider:Google Inc.
Cookiename:1P_JAR, _Secure, APISID, CGIC, CONSENT, DV, HSID, NID, OTZ, PAIDCONTENT, SAPISID, SEARCH_SAMESITE, SIDCC, SID, SNID, SSID
Runtime:365 Tage
Privacy source url:https://policies.google.com/privacy
Host:google.com, maps.google.com

Google Analytics

Dient zur Statistik und Erfassung personenbezogener Daten inkl. Seitenaufrufprofile durch Google

Provider:Google Inc.
Cookiename:_gat, _ga, _gid
Runtime:365 Tage
Privacy source url:https://policies.google.com/privacy
Host:google.com

Vimeo Videos

Registriert eine eindeutige ID, um Statistiken der Videos von Vimeo, die der Benutzer gesehen hat, zu behalten.

Provider:Vimeo.com, Inc.
Cookiename:Vimeo
Runtime:365 Tage
Privacy source url:https://vimeo.com/privacy
Host:vimeo.com

YouTube Videos

Registriert eine eindeutige ID, um Statistiken der Videos von YouTube, die der Benutzer gesehen hat, zu behalten.

Provider:Google Inc.
Cookiename:YouTube
Runtime:365 Tage
Privacy source url:https://policies.google.com/privacy
Host:youtube.com, youtube-nocookie.com, google.com

Save

BackOnly accept required cookies.

Privacy Notes Imprint

Login / Registration
 Link to registration